Re-instatment Cutters

Capable of climbing and creeping
Axial feed 100 mm
Maximum flexibility for bends up to 90°
Maximum cutting precision through electrical turn-swivel drives and integrated color camera
Powerful pneumatically driven cutting motor

large range of application in pipes from DN 80 to 150 / 3 up to 6 inch (inside diameter)
excellent movement of elbow up to 90° in DN 100 through rotating and swivel head
pneumatic clamping unit permits use also in vertical pipes
only very small access openings required
convenient media supply package of 30 m / 98,40 ft
extremely high cutting force through powerful air motor
flexible operation through remote control via cable
very precise control of cutter through joystick
great mobility convenience through compact chassis
damage prevention through automatic monitoring of internal pressure with signalling
further introduction possible through pipe eel
variable cutting tools can be installed
minimum downtimes in case of repair through operator-replaceable components or use of express service (see detailed description in the offer/order conditions)

useable from DN 80 to 150 / 3 up to 6 inch (inside diameter)
movement of elbow 90° from DN 100, (clay, no folds, or similar)
30 m / 98,40 ft media hose on drum
coupling elements for pipe eel
400° rotating and approx. 90° swivel movement with stops
air-powered cutter motor
camera attachment (camera not in scope of delivery)
splashproof according to IP 54
waterproof device with 0.8 bar nitrogen filling
permanent monitoring of internal pressure with signalling
cable remote control with joystick for rotation (sensitivity adjustable)and swivelling
outside diameter of cutter: 72 mm, overall dimensions: 660 x 550 x 800 mm (L x W x H)
Weight 35 kg
compact assembly of cutter on chassis with pneumatic rotary leadthrough
detachable individual components
box with job site tools, nitrogen filling adapter, set of replacement screws,
1 cutting tool carbide, manual, over view spare parts

Power supply:	85 - 264 VAC, 47 - 440 Hz, max. 2 A
Compressed air requirements:	schmutzfrei (Partikel < 5Mikrometer), clean (particles < 5 micron), temperature range 5 °C until max. 40 °C / 41 °F until max. 104 °F, rest water separated, rest oil < 5 mg/m3, pressure air supply max. 10 bar / 145 PSI, min. volume 1 m3/min / 35 CFM
Cutting tools:	Please only use cutting tools approved by IMS
Inside pressure monitoring:	Nitrogen refilling equipment essentially required

Demo Videos