Perma-Coating Equipment
Carrousel Pump
The Carrousel Pump operates by peristaltic or squeeze principle. It utilizes three rollers (trigon) which rotate against a soft rubber tube and flatten it against the U-shaped pressure wall of the pump. This squeezing action then forces the material through the system. The soft rubber tube, the heart of the system, is the only part that contacts pumped material. It is inexpensive and easily replaced for damage or wear.
CG 550 Workhorse - Skid Mounted
The CG-550 Workhorse series includes both skid and trailer mounted grouting equipment. This workhorse unit is designed to mix and pump neat cement, bentonite, cement/bentonite, cement/sand, non-shrink, self leveling and most packaged grout mixes. These units feature a 45 gallon (170 liters) mixing tank, a 10 gallon (38 liters) holding hopper and a 8 GPM (30 LPM) progressive cavity grout pump. The balanced design of this grout plant allows continuous mixing and pumping, while the hopper is feeding the pump another batch can be mixed. The mix tank is equipped with baffles, bag breakers and variable speed high-efficiency paddles that provide rapid mixing.
CG 550 Workhorse - Rugged Trailer Mounted
The CG-550 Rugged series includes both skid and trailer mounted grout plants. These units feature a 45-gallon (170 liters) mixing tank, a large 30-gallon (113 liters) holding hopper and the popular single-acting piston grout pump. Each mixing tank is equipped with baffles, bag breakers and a variable speed high-efficiency paddle mixer that provides rapid grout mixing. The tank outlets are large slide gates that allow viscous grouting materials to flow quickly into the removable holding hopper. The large holding hopper is sized to provide continuous pumping, the mixer is charged while the hopper feeds the pump.
CG 575 Thick Mix - Trailer Mounted
The CG 575 trailer mounted grout plant comes with its own integral power system. This machine will continuously mix and pump the widest range of grouting materials from thin to thick consistencies. Materials that are used with this unit include mortars, plasters, stuccos, fireproofing, cement/sand, cement/fly ash, flowable and non-flowable grouts and waterproofing bentonite grouts. The optional air compressor allows the operator to continuously mix, pump and spray. The mixing tank is equipped with baffles, bag breakers and variable speed high-efficiency paddles that provide rapid mixing. The tank outlet valves are large slide gates that allow the thickest materials to fall easily into the pump hopper. The holding hopper has an auger in it to keep the material thoroughly mixed while constantly supplying the grout pump with material for the continuous pumping operation. The grout pump is a variable speed, positive displacement, progressive cavity, rotor-stator pump.
Perma-Coatings
Demo Videos
Connect With Us!
